Advanced Media Design DMR300 Especificações

COGNEX®DataMan® 300 SeriesQuick Reference Guide

21Remove lens plug.Thread the lens into the reader.31. Connect the reader to the Setup Tool.2. On the Results Display pane, check the Focus Feedback

While carefully avoiding rotating the lens, press the rubber lens-locking cone into the reader until it snaps into place inside the C-mount threads an

22 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 232Thread the lens into the reader.31. Connect the reader to the Setup Tool

NOTEDo not unscrew the front-most part of the nose of the cover to avoid risking the glass lens falling out.Align the peg on the reader and the slot o

• Using coaxial (DOAL) light • Using dark eld light• Using ring light• Using spot light26 DataMan 300 Quick Reference Guide DataMan 300 Quick Re

28 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 29Setting Focus There is a range of reading distances available for differen

30 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 31• The supplied focus target (120x120mm) is appropriate for typical workin

Reading Distance and Field of View (DataMan 300 Series Readers with a 10.3 mm Lens)1-D2-D195 mm (7.6 in)100mmin003200300691240050060015182196.2 mm (3.

Reading Distance and Field of View (DataMan 300 Series Readers with a 16 mm Lens)245 mm (15.3 in)125 mm (4.9 in)45 mm (1.7 in) (2.8 in)6 mil 400 mm (

Observe the following DataMan 300 series reader dimensions when installing your reader.36 DataMan 300 Quick Reference Guide DataMan 300 Quick Referen

ii DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide iiiSection Title•Page 21Getting StartedAbout DataMan 300 Series • For More In

Do not stare into beam when adding, removing, or changing cables. Cognex recommends to unpower the reader any time you make physical changes to it. CO

IN1 buttonTune button40 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 41Start the Setup ToolTrigger buttonConnect the reader

42 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 43Use the Setup Tool Menu BarThe In1 button on the toolbar creates a virtual

44 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 45Troubleshooting an Ethernet ConnectionBased on your network conguration,

46 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 47DataMan 300 series readers support the following trigger modes: • Self: A

By tuning, your DataMan 300 series reader automatically selects the best settings for the given reading situation, based on parameters of illumination

• CloseThis lter performs a dilation followed by an erosion to lter out dark features that are smaller than the size of the processing neighborhood

5. Go to the Displayed Image Settings pane and change the Images to Use according to what you want to see on Live Display: the original or the ltere

1 2 3 4 554 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 55Training FeedbackThe second LED from left on the reader glows gr

26.4V 1 2 10 9 812 311 4 7 6 556 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 57Acquisition TriggeringThe acquisition trig

4 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 5About DataMan 300 Series ReadersFor More Information...DataMan 300 series re

58 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 59High-Speed Output LinesThe high-speed outputs can be used as either NPN (p

60 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 61High Speed Output WiringTo connect to an NPN-compatible PLC input, connect

62 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 63Weight 165 gOperating Temperature0ºC — 45ºC (32ºF — 113ºF)Storage Temperat

64 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 65radio frequency energy and, if not installed and used in accordance with t

66 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 67to use the appropriate separate take-back systems for product disposal.If

P/N 590-7136Copyright © 2012 Cognex Corporation All Rights Reserved. This document may not be copied in whole or in part, nor transferred to any other

16 mm M12 lens with locking (DM300-LENS-16)External light mounting brackets (DM300-ELMB-xx) (xx species light type)Coaxial light(CLRO-K5050G1)Ring li

The following image shows the built-in lighting system of the DataMan 300 series reader, underneath the plastic lighting cover.Mounting holes (M3

Trigger buttonTuning buttonPeak meterPowerTrain and trigger statusGood/bad readNetworkError• Power: GREEN = Power ON• Signal: GREEN = trained / YELL

341. Connect the reader to the Setup Tool.2. On the Results Display pane, check the Focus Feedback option and enable Live Display. For best results,

1Remove lens plug.2Light connector14 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 156Attach front cover.7Insert and tighten

4Connect the liquid lens cable to the reader.Snap the liquid lens module onto the nose of the lens, making sure that it lies at.Light connector16 Da